BKFPM - 0.32 OZ 303 COPPER LIQUITEX ARTISTS' OIL COLOR SERIES 1143
- MSDS: BKFPM
- Manufacturer: BINNEY AND SMITH INC
- Product Name: 0.32 OZ 303 COPPER LIQUITEX ARTISTS' OIL COLOR SERIES 1143
- National Stock Number: 8010-00F016028
Product Identification
Product ID:0.32 OZ 303 COPPER LIQUITEX ARTISTS' OIL COLOR SERIES 1143
MSDS Date:09/01/1984
FSC:8010
NIIN:00F016028
MSDS Number: BKFPM
Responsible Party
EASTON, PA 18044-0431
Emergency Phone: (215) 253-6271
Info Phone: (316) 221-4200
Cage: 85419
Contractor
Telephone: 800-272-9652
Cage: 85419
Ingredients
PETROLEUM DISTILLATE
CAS: 68477-31-7
ACGIH TLV: 100 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HEADACHE & NAUSEA. EYES:
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHE & NAUSEA. EYES:
IRRITATION.
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS.
INHALATION: REMOVE TO FRESH AIR. GIVE CPR OR OXYGEN IF NEEDED.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:103F
Extinguishing Media:FOAM, CO2
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:CLEAN UP WITH ABSORBENT MATERIALS & PLACE IN A
CLOSED CONTAINER. AVOID SPONTANEOUS COMBUSTION OF CONTAMINATED
CLEANING MATERIALS BY PLACING IN AN APPROVED CONTAINER OR IMMERSION
IN WATER.
Handling
Handling and Storage Precautions:USE IN WELL VENTILATED AREA.
Exposure Controls
Respiratory Protection:NONE
Ventilation:PROVIDE GENERAL VENTILATION.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:310-375F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:18-22%
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES, & HOT SURFACES
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.